After the Uprising update, my PS3 started to shut off by itself. I thought it was a glitch because it's never done that before. ( and this build is super glitchy ) After the third time I decided to stop playing Dust for fear of my PS3. My fears were correct as now it does it on other games too..

There are MULTIPLE threads about this in the bugs section of the forum, but I wanted to start a thread here because it's the most used section.

Just wanted to let people know before multiple PS3s die to this game.

My fat PS3 is a juggernaught, 5 years strong and still going, it will make it to the PS4 release and beyond.

Your PS3 is dying. Soon you'll get the YLOD (yellow light of death)

That's what I thought Sunday.

did you clean it once a month? I hit the fans with air compressors and then vacuum the remaining dust out. My PS3 is usually left on 24 hours a day while I am at work or away from home.

It froze on me once, but that was when I was logging off from the merc quarters. I suggest elevating your phatS3 with a couple of small blocks so that air can pass under it to prevent the shelf or desk from reflecting heat back into the console. Works wonders for me.

well first time i ran it it went smooth for like 2-3 hours, then it just got bad, like every 20 minutes. Is it a backwards compatible version?

If you have the money, trade up to a slim. If not, I would look into making the first move and do some preventative maintenance before something goes wrong. Good luck.

Dust514 is not the problem. YLOD is a hardware problem, it has nothing to do with what you're running. I got the YLOD on my phat ps3 last month. I took it to my local video game shop where a guy fixed it and everything has been good since. No changes in software or play time whatsoever.

I use a 60 gig Phat PS3 and have never problems with this build or the last shutting off my system.

I edited my post cause I realized it wasn't very clear. sorry

I use a 60 gig Phat PS3 and have never problems with this build or the last shutting off my system.

I dont have the YLOD, the game just shuts off, beeps, red light blinks, go to press to turn on, beeps again turns solid red, touch to turn on again and turns green and turns on as usual and goes to xmb. you will not get to the xmb with a ylod ever.

That sounds like the same symptoms I had when I played Skyrim and Little Big Planet on my fat PS3 before it YLOD'ed. Its better to do preventative maintenance so you don't have to worry about corrective maintenance.

Thanks for feedback, glad to see its not all the phatboys. Thing is, i took it all apart today, cleaned it head to toe, put it back together, and same thing. Tested on other games and hasnt done it. Maybe Uprisging is making the ps3 run harder or something. Might try to apply new heat sink gel tomorrow and see if thats a problem then, just wierd its not doing it on any other games for me at least so far.

I dont have the YLOD, the game just shuts off, beeps, red light blinks, go to press to turn on, beeps again turns solid red, touch to turn on again and turns green and turns on as usual and goes to xmb. you will not get to the xmb with a ylod ever.

I'm telling you it's YLOD cuz I had this VERY problem a few months ago. Shuts off randomly and beeps a few times. Turn it back on, no problem. I guarantee you that you can play games on discs for a while but ANY game running off your HD will crash. Soon you won't be able to play disc based games either.

Your old PS3 is seeing its last days.

Do you remember how old it was?

I think there is a difference in fatty's over the years (there'd have to be). I suspect it's with 1st gen fatty's.

backwards compatible 60 gig so one of the 1st gen fatty model i do believe. My PS was also bought refurbished in November and went YLOD back in march but wasn't running dust was just in XMB looking at stuff on my system

I've been running a different game off my HDD for now going on 3 hours just outta curiosity, and I'm gonna let it go all night. It YLOD two years ago and i fixed it, and if it does it again ill do it again, its too close to ps4 for me to buy another ps3 without backwards compatibility =)

That's the most disappointing thing. It's so close to the PS4, and because of someone's crap code, I have to make a crap decision.

I've been running a different game off my HDD for now going on 3 hours just outta curiosity, and I'm gonna let it go all night. It YLOD two years ago and i fixed it, and if it does it again ill do it again, its too close to ps4 for me to buy another ps3 without backwards compatibility =)

Exactly, well I'm done bumping this to the top, CCP will either see it and help, or ignore. I can't keep it up all night. Ill keep in touch with you if they respond to my email i sent to support an hour ago.

Hello everyone,

Our teams were able to reproduce this on slow Hard Drives (on old versions of PS3). In case you are experiencing any performance issues - low FPS, latency or audio stutter, we advise you to rebuild database, restore PS3 system or if you are able to - replace your hard drive. As mentioned previously as well, clean your console to avoid overheating in general in case it is an old model!

Thank you.

I dont have the YLOD, the game just shuts off, beeps, red light blinks, go to press to turn on, beeps again turns solid red, touch to turn on again and turns green and turns on as usual and goes to xmb. you will not get to the xmb with a ylod ever.

That is a likely situation. Be glad you have this chance to back up your data. I paid someone to fix mine ($80) mostly because when you get YLOD there are very few ways to save your data and transfer it to a ps3 slim, since you can't operate your current ps3. And you can't just plug your hard drive into a new ps3 because when you do that, it auto formats it!

Hello everyone,

Our teams were able to reproduce this on slow Hard Drives (on old versions of PS3). In case you are experiencing any performance issues - low FPS, latency or audio stutter, we advise you to rebuild database, restore PS3 system or if you are able to - replace your hard drive. As mentioned previously as well, clean your console to avoid overheating in general in case it is an old model!

Thank you.

Hello everyone,

Our teams were able to reproduce this on slow Hard Drives (on old versions of PS3). In case you are experiencing any performance issues - low FPS, latency or audio stutter, we advise you to rebuild database, restore PS3 system or if you are able to - replace your hard drive. As mentioned previously as well, clean your console to avoid overheating in general in case it is an old model!

Thank you.

Really useful stuff

My fat PS3 is a juggernaught, 5 years strong and still going, it will make it to the PS4 release and beyond.

yawns mines an original 60 gb and has had a 500 gb in it for 4 years runs like a beauty queen

ATTENTION ALL OWNERS OF THE PHAT PLAYSTATION 3 (PS3)


The new Uprising build seems to push the PS3 hardware near its limits, which puts a strong stress on the hardware material, and thus your old machine is at high risk of getting the infamous Yellow light of death (YLOD).

Look here to find out exactly wich machine you have (and other nice secrets about the PS3).
If you have any of the backwards compatible machines you are at most risk, and to a little less degree if you have the CECHG or CECHH. If you have any later you are mostly safe, but all fatties are prone to break.


The YLOD is the result of a combination of insufficient cooling and weak solder.

Both the Xbox360 and PS3 were rushed. The 360 because MS was dead sure that the PS3 was to be released early 2006 (which was the plan for long, but the development of the Cell BE was delayed and became full of problems near the end and basically screwed the PS3, among Ken Kutaragis hybris, but that's another story), and they wanted to be first in the next gen. The PS3 because they didn't wanna be too late (they didn't really need to by themselves, the PS2 still sold good, but they had already triggered the competition to go next gen, so they had no choise).
So they stuffed in hotter components than what was suitable, and hoped for the best. But it was also very expensive, which lead them to be parsimonious in regards to some details. Airflow wasn't sufficient. The fan was later changed to a model which is believed to be faulty in design and rotate hot air. The thermal paste and pads are of bad quality and does transfer heat very well, and morevoer tends to dry out after about 3 years and severely limits the cooling ability. This is why most phat PS3s have died not so long after their third birthday.
The second part is weak soldering. At the time, a new European union directive took effect, which restricted the use of lead among other materials, in electronic devices. This only applies to EU of course, but to save costs of having two different manufacturing processes, the manufacturers implemented it worldwide. This was nowhere near any surprise for the industry, but despite this, the industry struggled against, and waited for the longest to implement it. This meant that the electronics manufacturers had little to no experience of making lead-free solders. This lead (hehu) to solders made in this time were not so sturdy and durable as they used to be. This haden't had to be the case if the industry took action earlier, and perhaps if Sony and MS gave the manufacturers a few more cents to try to make better ones.
All this is most likely a calculated risk Sony and Microsoft took to get their machines on the market. If they break after 3 years, when most warranties have ended, it is a later problem and somewhat easier to fix. And most of all, not so much of their problem.

Insufficient cooling and weak solder...

The faulty cooling means the machine reaches excessive temperatures almost everytime it is switched on. Repeatedly heating the material to excessive temperatures, and then cooling after switch off, stresses the material and causes the solder to crack eventually, thus loosing electrical connection. Even just one faulty solder of the many hundred solders are enough to make it go. Sometimes it causes a break in a non-essential part and makes the machine glitch and hang, and/or the screen to show blurred colors in raster patterns.


To prevent this, and keep your beloved machine alive, read this comprehensive guide to help prevent the YLOD. It's very good, complete with videos and handy tips.


TL;DR : just check this link mentioned just above.


And could the OP perhaps edit his OP and refer to this and the CCP dudes post? Thus peeps don't have to look near and far for the juicy parts.




Edit: can any of the fatboy owners out there give a word on if your problems were solved after changing harddrive? Preferably to a 7200rpm, but I don't think it really matters. Larger drives are faster. Perhaps it really just is that. Thank you.

Hello everyone,

Our teams were able to reproduce this on slow Hard Drives (on old versions of PS3). In case you are experiencing any performance issues - low FPS, latency or audio stutter, we advise you to rebuild database, restore PS3 system or if you are able to - replace your hard drive. As mentioned previously as well, clean your console to avoid overheating in general in case it is an old model!

Thank you.

Hello everyone,

Our teams were able to reproduce this on slow Hard Drives (on old versions of PS3). In case you are experiencing any performance issues - low FPS, latency or audio stutter, we advise you to rebuild database, restore PS3 system or if you are able to - replace your hard drive. As mentioned previously as well, clean your console to avoid overheating in general in case it is an old model!

Thank you.