DUST Search - Gunnlogi Fittings.

All Channels

Rookie Training Grounds

Gunnlogi Fittings.

» Click here to find additional results for this topic using Google

Monitor this thread via RSS [?]

Pages: [1] :: one page

Author	Thread Statistics \| Show CCP posts - 0 post(s)
Xender17 Ahrendee Mercenaries EoN. 502	Posted - 2013.08.29 08:48:00 - [1] - Quote I haven't really seen another gunnlogis fitting.
Tebu Gan CrimeWave Syndicate 55	Posted - 2013.08.29 14:04:00 - [2] - Quote Xender17 wrote: I haven't really seen another gunnlogis fitting. So i wanted to know if anyone well post their fittings? Missiles fit Left side Best shield extender x2 ward shield amplifier Best shield booster Speed booster Right side x2 15% PG boosters Turrets Advanced Fragmented Missile - Large Proto Blaster and Missile - Smalls High mitigation railgun Left side Best shield extender x2 ward shield amplifiers Supplemental shield booster Active Heat sink Right side x2 15% PG boosters Turrets Proto railgun -Large Standard frag missiles -Smalls These are a few of my fits, things to note. Fitting blasters means you have to severely reduce mitigation abilities Missiles use the least amount of PG If you are new, check my guide out Shield tanking guide In a month,tanks will be changing btw, fitting will change drastically.
N1ck Comeau Ahrendee Mercenaries EoN. 1208	Posted - 2013.08.29 19:22:00 - [3] - Quote I prefer to passive recharge my GunnLogi. I run Scattered neutron blaster 2 Standard accelerated missiles 3 ward rechargers. one heavy extender. the best passive hardener. either two of the 7% pg shields and recharge things or one of those and a damage mod. This is mainly for pubs. Going against other tanks can be a problem so i try to flank if i can. this puts me at around 38 recharge rate, but i'll have around 43-45 once i max out skills.
Tebu Gan CrimeWave Syndicate 55	Posted - 2013.08.29 22:15:00 - [4] - Quote N1ck Comeau wrote: I prefer to passive recharge my GunnLogi. I run Scattered neutron blaster 2 Standard accelerated missiles 3 ward rechargers. one heavy extender. the best passive hardener. either two of the 7% pg shields and recharge things or one of those and a damage mod. This is mainly for pubs. Going against other tanks can be a problem so i try to flank if i can. this puts me at around 38 recharge rate, but i'll have around 43-45 once i max out skills. Currently, passive recharge is what I would call, useless. Not being rude or nothing but you would be better off running ward Amplifiers to increase your ability to take damage. Yes shield tanks are supposed to use the passive recharge on their shields more for healing, but the recharge rate is horrible in it's current form. This has been acknowledged by the Devs, 1.5 upcoming tank changes. It will be getting a huge revamp in the future. You will find you survive far longer using passive amplifiers to boost damage resist as opposed to using recharge. At most you have something around 20% resistance to damage. My tanks always run at the very least, Above 30%. This requires at least 2 Ward shield amplifiers. I can understand why you have trouble with tanks, good tankers always have high mitigation, which is a combination of your healing ablitiy, Resistance to damage, and your total HP. And if you read that link I put up, you will notice that they are removing passive shield recharge on tanks for 1.5, not to be implemented until 1.6. Not to mention removing most of the current modules. If you scroll down near the bottom of the link, there is a list of what modules will be available.
Pandora Mars Afterlife Overseers 253	Posted - 2013.08.30 00:39:00 - [5] - Quote I will share my precious fittings with you. Blaster Gunnlogi. -Azeotropic Heavy Shield Extender -Azeotropic Shield Extender -Heavy Clarity Ward Shield Booster -2x Ward Shield amplifiers -2x 15% PG upgrade -20GJ ST-1 fragmented missile -20GJ ST-1 Cycled missile -80GJ Scattered Neutron Blaster Rail Gunnlogi -Azeotropic Heavy Shield Extender -Active Heat Sink -Heavy Clarity Ward Shield Booster -2x Ward Shield amplifiers -2x 15% PG upgrade -20GJ ST-1 fragmented missile -20GJ ST-1 Cycled missile -80GJ Compressed Particle Accelerator. These are high-level tanks, but you can copy this pattern and fit cheaper tanks with Converse and Supplemental modules to save precious PG. You can also use STD large turrets instead of ADV, but always go for the SCATTERED blaster and COMPRESSED rail gun, they are expensive but it's the only way to survive against an enemy tank, if you're fitting STD turrets. Otherwise, you will be outgunned.
Xender17 Ahrendee Mercenaries EoN. 503	Posted - 2013.08.30 03:01:00 - [6] - Quote What are you guys opinions on resistance amplifiers vs best version (starts with a Az) small shield extenders? I've gotten multiple opinions on both, in game. However most people don't get to explain themselves very well in game.
Pandora Mars Afterlife Overseers 254	Posted - 2013.08.30 03:48:00 - [7] - Quote Xender17 wrote: What are you guys opinions on resistance amplifiers vs best version (starts with a Az) small shield extenders? I've gotten multiple opinions on both, in game. However most people don't get to explain themselves very well in game. Shield amps suffer of stacking penalty, unfortunately. Make sure you have 2 Ward shield amps for a massive resistance bonus and you are ok. A third one would have its effectiveness sensibly reduced (still it's not crap), but definitely go for 2 of them. If you have the PG/CPU, go for a small Azeo extender next to them, that's my personal advice.
N1ck Comeau Ahrendee Mercenaries EoN. 1212	Posted - 2013.08.30 05:11:00 - [8] - Quote Tebu Gan wrote: N1ck Comeau wrote: I prefer to passive recharge my GunnLogi. I run Scattered neutron blaster 2 Standard accelerated missiles 3 ward rechargers. one heavy extender. the best passive hardener. either two of the 7% pg shields and recharge things or one of those and a damage mod. This is mainly for pubs. Going against other tanks can be a problem so i try to flank if i can. this puts me at around 38 recharge rate, but i'll have around 43-45 once i max out skills. Currently, passive recharge is what I would call, useless. Not being rude or nothing but you would be better off running ward Amplifiers to increase your ability to take damage. Yes shield tanks are supposed to use the passive recharge on their shields more for healing, but the recharge rate is horrible in it's current form. This has been acknowledged by the Devs, 1.5 upcoming tank changes. It will be getting a huge revamp in the future. You will find you survive far longer using passive amplifiers to boost damage resist as opposed to using recharge. At most you have something around 20% resistance to damage. My tanks always run at the very least, Above 30%. This requires at least 2 Ward shield amplifiers. I can understand why you have trouble with tanks, good tankers always have high mitigation, which is a combination of your healing ablitiy, Resistance to damage, and your total HP. And if you read that link I put up, you will notice that they are removing passive shield recharge on tanks for 1.5, not to be implemented until 1.6. Not to mention removing most of the current modules. If you scroll down near the bottom of the link, there is a list of what modules will be available. Yea, i perfer madruagars over gunnlogis anyways, but that recharge style type fit is mainly for hit and run, go in get some kills and leave.
demonkiller 12 Seraphim Auxiliaries 146	Posted - 2013.08.30 05:31:00 - [9] - Quote Tebu Gan wrote: N1ck Comeau wrote: I prefer to passive recharge my GunnLogi. I run Scattered neutron blaster 2 Standard accelerated missiles 3 ward rechargers. one heavy extender. the best passive hardener. either two of the 7% pg shields and recharge things or one of those and a damage mod. This is mainly for pubs. Going against other tanks can be a problem so i try to flank if i can. this puts me at around 38 recharge rate, but i'll have around 43-45 once i max out skills. Currently, passive recharge is what I would call, useless. Not being rude or nothing but you would be better off running ward Amplifiers to increase your ability to take damage. Yes shield tanks are supposed to use the passive recharge on their shields more for healing, but the recharge rate is horrible in it's current form. This has been acknowledged by the Devs, 1.5 upcoming tank changes. It will be getting a huge revamp in the future. You will find you survive far longer using passive amplifiers to boost damage resist as opposed to using recharge. At most you have something around 20% resistance to damage. My tanks always run at the very least, Above 30%. This requires at least 2 Ward shield amplifiers. I can understand why you have trouble with tanks, good tankers always have high mitigation, which is a combination of your healing ablitiy, Resistance to damage, and your total HP. And if you read that link I put up, you will notice that they are removing passive shield recharge on tanks for 1.5, not to be implemented until 1.6. Not to mention removing most of the current modules. If you scroll down near the bottom of the link, there is a list of what modules will be available. Missile tanks are most useless thing you could do, there is no point fitting a missile turret to a gunloggi because a) missile turrets are not good. b) shield tanks lose to armor shield tanks are purely meant to fight infantry and you should only use a blaster (or rail if you want to do skirm/dom)
Takahiro Kashuken Red Star. EoN. 1144	Posted - 2013.08.30 11:05:00 - [10] - Quote demonkiller 12 wrote: Tebu Gan wrote: N1ck Comeau wrote: I prefer to passive recharge my GunnLogi. I run Scattered neutron blaster 2 Standard accelerated missiles 3 ward rechargers. one heavy extender. the best passive hardener. either two of the 7% pg shields and recharge things or one of those and a damage mod. This is mainly for pubs. Going against other tanks can be a problem so i try to flank if i can. this puts me at around 38 recharge rate, but i'll have around 43-45 once i max out skills. Currently, passive recharge is what I would call, useless. Not being rude or nothing but you would be better off running ward Amplifiers to increase your ability to take damage. Yes shield tanks are supposed to use the passive recharge on their shields more for healing, but the recharge rate is horrible in it's current form. This has been acknowledged by the Devs, 1.5 upcoming tank changes. It will be getting a huge revamp in the future. You will find you survive far longer using passive amplifiers to boost damage resist as opposed to using recharge. At most you have something around 20% resistance to damage. My tanks always run at the very least, Above 30%. This requires at least 2 Ward shield amplifiers. I can understand why you have trouble with tanks, good tankers always have high mitigation, which is a combination of your healing ablitiy, Resistance to damage, and your total HP. And if you read that link I put up, you will notice that they are removing passive shield recharge on tanks for 1.5, not to be implemented until 1.6. Not to mention removing most of the current modules. If you scroll down near the bottom of the link, there is a list of what modules will be available. Missile tanks are most useless thing you could do, there is no point fitting a missile turret to a gunloggi because a) missile turrets are not good. b) shield tanks lose to armor shield tanks are purely meant to fight infantry and you should only use a blaster (or rail if you want to do skirm/dom) lol bad player

Operative 1171 Aajli Bragian Order Amarr Empire 195	Posted - 2013.08.30 13:31:00 - [11] - Quote I've had better overall success running all passive save the hardener. Every time I've fitted a booster it just didn't do anything. Less HP and only five seconds of eHP. With passive I've resisted orbitals. With active a blaster still tears through me too quick. Recharge takes longer but you should be patrolling around the board to recharge anyway. I use 2x Hvy Aziotropic extenders, 2x amps, 1 Surge hardener. Or 2x Surge hardener and 1 amp if I can't fit the other fit due to turret type.
Tebu Gan CrimeWave Syndicate 56	Posted - 2013.08.30 13:32:00 - [12] - Quote Takahiro Kashuken wrote: demonkiller 12 wrote: Tebu Gan wrote: N1ck Comeau wrote: I prefer to passive recharge my GunnLogi. I run Scattered neutron blaster 2 Standard accelerated missiles 3 ward rechargers. one heavy extender. the best passive hardener. either two of the 7% pg shields and recharge things or one of those and a damage mod. This is mainly for pubs. Going against other tanks can be a problem so i try to flank if i can. this puts me at around 38 recharge rate, but i'll have around 43-45 once i max out skills. Currently, passive recharge is what I would call, useless. Not being rude or nothing but you would be better off running ward Amplifiers to increase your ability to take damage. Yes shield tanks are supposed to use the passive recharge on their shields more for healing, but the recharge rate is horrible in it's current form. This has been acknowledged by the Devs, 1.5 upcoming tank changes. It will be getting a huge revamp in the future. You will find you survive far longer using passive amplifiers to boost damage resist as opposed to using recharge. At most you have something around 20% resistance to damage. My tanks always run at the very least, Above 30%. This requires at least 2 Ward shield amplifiers. I can understand why you have trouble with tanks, good tankers always have high mitigation, which is a combination of your healing ablitiy, Resistance to damage, and your total HP. And if you read that link I put up, you will notice that they are removing passive shield recharge on tanks for 1.5, not to be implemented until 1.6. Not to mention removing most of the current modules. If you scroll down near the bottom of the link, there is a list of what modules will be available. Missile tanks are most useless thing you could do, there is no point fitting a missile turret to a gunloggi because a) missile turrets are not good. b) shield tanks lose to armor shield tanks are purely meant to fight infantry and you should only use a blaster (or rail if you want to do skirm/dom) lol bad player ^ ^ nuff said Went 11/0 with my missile fit and 21/0 on my blaster fit last night. Blasters my get more kills, but with a missile fit, you have your mitigation is maxed. Not to mention proto rider turrets. Blueberries did some good in my tank last night, they used those proto turrets well, and they got out and hacked objectives. Missiles, they aren't as good at killing infantry as a blaster yes, but they still get the job done.
Charlotte O'Dell 0uter.Heaven 1255	Posted - 2013.08.31 16:06:00 - [13] - Quote My blaster/gunlogi fittings
Freg86 Greatness Achieved Through Training EoN. 9	Posted - 2013.09.01 05:49:00 - [14] - Quote going post missile fit, i'm not big fan of missile on my tank but they useful at mid range sometimes.... AT-201 fragmented missile 2x st1 cycled missile 2x ward shield amplifier heavy converse shield booster heavy supplemental shield extender azeotropic ward shield extender local powergrid heavy payload control system II cost 634,760 isk


Pages: [1] :: one page
First page \| Previous page \| Next page \| Last page