DUST Search - Vehicle - Shield Tanks

All Channels

General Discussions

Vehicle - Shield Tanks - Rails

» Click here to find additional results for this topic using Google

Monitor this thread via RSS [?]

Pages: 1 [2] :: one page
Author	Thread Statistics \| Show CCP posts - 0 post(s)
Casius Hakoke Molon Labe. League of Infamy 286	Posted - 2013.08.24 00:39:00 - [31] - Quote Tebu Gan wrote: Casius Hakoke wrote: pegasis prime wrote: Yip if im with a squad which is most of the time these days then ill only red line rail if a red line rail forces me to. Other than that ill be on the fronr eithr shredding (blasters) incinerating (missiles) or vaporising (rails) on the front line. I love getti g 20+kills with a rail all within 60m of my tank . That's a good feeling thought. I don't use my rail tank as much as my blaster fit. But there is just something really fun about getting close range rail kills. It is the best. I actually have a rail tank fit with 2 pg boosters and my best mods. Tough rail tank, good for killin glass cannon fits. I'm primarily a blaster tanker, but rails do have a special place in my heart. If nothing else than because it makes me laugh so hard to kill infantry at close range with the weapon.
Casius Hakoke Molon Labe. League of Infamy 286	Posted - 2013.08.24 00:41:00 - [32] - Quote pegasis prime wrote: I put up some prerty sturdy shield fits in voids guide but that has been buried for the time being. My front line rail runs with 33% resists and about 6000 shields (rough figures) To be honest, its been a long time sense I've called in any of my shield tanks. Kind of miss the old girl sometimes, but I've found I love having utility high slots.
pegasis prime BIG BAD W0LVES Eternal Syndicate 669	Posted - 2013.08.24 00:41:00 - [33] - Quote Yip love it oh look proto suit thunk pop + 60 points ahhhh .
Tebu Gan CrimeWave Syndicate 40	Posted - 2013.08.24 00:42:00 - [34] - Quote pegasis prime wrote: I put up some prerty sturdy shield fits in voids guide but that has been buried for the time being. My front line rail runs with 33% resists and about 6000 shields (rough figures) My shields are at 5400, with 33% resist, unless I used a small aztropic extender in place of my active heatsink. Love that heatsink though. Still need to test out my passive heatsink fit.
pegasis prime BIG BAD W0LVES Eternal Syndicate 669	Posted - 2013.08.24 00:43:00 - [35] - Quote The only time I pull maddys is whennim facing 1 or more troubling maddys.
pegasis prime BIG BAD W0LVES Eternal Syndicate 669	Posted - 2013.08.24 00:44:00 - [36] - Quote Tebu Gan wrote: pegasis prime wrote: I put up some prerty sturdy shield fits in voids guide but that has been buried for the time being. My front line rail runs with 33% resists and about 6000 shields (rough figures) My shields are at 5400, with 33% resist, though. If I used a small aztropic extender in place of my active heatsink. Love that heatsink though. Still need to test out my passive heatsink fit. I only use the heat sync on my glass cannon. Or maddy blaster. Passives are crap for rails better for blasters.
Tebu Gan CrimeWave Syndicate 40	Posted - 2013.08.24 00:46:00 - [37] - Quote pegasis prime wrote: The only time I pull maddys is whennim facing 1 or more troubling maddys. Man, always hate getting blown up by one in a close range engagement. Running missiles mostly atm, so I've been trying, but a good fit maddie eats em up. Man if I got one though, that kill would be sweeeet.
Casius Hakoke Molon Labe. League of Infamy 286	Posted - 2013.08.24 00:46:00 - [38] - Quote pegasis prime wrote: The only time I pull maddys is whennim facing 1 or more troubling maddys. I have fallen in love with using active heat sinks, I mean who hasn't. Plus an active scanner, that thing has saved my tank I don't know how many times. I used to have a Damage Control instead of the active scanner, but it has at least doubled my survivability. Plus it helps my team know some of the best places to focus on.
Tebu Gan CrimeWave Syndicate 40	Posted - 2013.08.24 00:47:00 - [39] - Quote pegasis prime wrote: Tebu Gan wrote: pegasis prime wrote: I put up some prerty sturdy shield fits in voids guide but that has been buried for the time being. My front line rail runs with 33% resists and about 6000 shields (rough figures) My shields are at 5400, with 33% resist, though. If I used a small aztropic extender in place of my active heatsink. Love that heatsink though. Still need to test out my passive heatsink fit. I only use the heat sync on my glass cannon. Or maddy blaster. Passives are crap for rails better for blasters. Was thinking passives with an active. Trying it on my Proto compressed first to see how many more shots I can get from it. Just wanna test the passives out. Need to look into running a heavy damage missile. hmmmm
pegasis prime BIG BAD W0LVES Eternal Syndicate 670	Posted - 2013.08.24 00:49:00 - [40] - Quote Tebu Gan wrote: pegasis prime wrote: The only time I pull maddys is whennim facing 1 or more troubling maddys. Man, always hate getting blown up by one in a close range engagement. Running missiles mostly atm, so I've been trying, but a good fit maddie eats em up. Man if I got one though, that kill would be sweeeet. If your using missiles try nit to out yoirself in anywhare where you dont habe a good 100m roind you . I verry rarely get up close to other tanks with missiles . If you can keep the maddy at about 150m then its blasters will be usless against your shields and your missiles will shread their armour.
Tebu Gan CrimeWave Syndicate 41	Posted - 2013.08.24 00:49:00 - [41] - Quote Casius Hakoke wrote: pegasis prime wrote: The only time I pull maddys is whennim facing 1 or more troubling maddys. I have fallen in love with using active heat sinks, I mean who hasn't. Plus an active scanner, that thing has saved my tank I don't know how many times. I used to have a Damage Control instead of the active scanner, but it has at least doubled my survivability. Plus it helps my team know some of the best places to focus on. Wish I could use a scanner. My wheel usually only consists of 2 things, a heal and a heatsink/speed booster. Buddy of mine, Lone - Wolf let me run around in one of his. IT was awesome. So many things to turn on. Felt like a tank.
pegasis prime BIG BAD W0LVES Eternal Syndicate 670	Posted - 2013.08.24 00:51:00 - [42] - Quote Tebu Gan wrote: pegasis prime wrote: Tebu Gan wrote: pegasis prime wrote: I put up some prerty sturdy shield fits in voids guide but that has been buried for the time being. My front line rail runs with 33% resists and about 6000 shields (rough figures) My shields are at 5400, with 33% resist, though. If I used a small aztropic extender in place of my active heatsink. Love that heatsink though. Still need to test out my passive heatsink fit. I only use the heat sync on my glass cannon. Or maddy blaster. Passives are crap for rails better for blasters. Was thinking passives with an active. Trying it on my Proto compressed first to see how many more shots I can get from it. Just wanna test the passives out. Need to look into running a heavy damage missile. hmmmm 1 10% dammage mod is good if your using proto missiles but if not then concentrait on speed and resistane. High tank low gank I keep telling folks a tank that lives will carry on doing dammage no matter what grade its turrets are.
Casius Hakoke Molon Labe. League of Infamy 288	Posted - 2013.08.24 00:52:00 - [43] - Quote Tebu Gan wrote: Casius Hakoke wrote: pegasis prime wrote: The only time I pull maddys is whennim facing 1 or more troubling maddys. I have fallen in love with using active heat sinks, I mean who hasn't. Plus an active scanner, that thing has saved my tank I don't know how many times. I used to have a Damage Control instead of the active scanner, but it has at least doubled my survivability. Plus it helps my team know some of the best places to focus on. Wish I could use a scanner. My wheel usually only consists of 2 things, a heal and a heatsink/speed booster. Buddy of mine, Lone - Wolf let me run around in one of his. IT was awesome. So many things to turn on. Felt like a tank. I know, armor tanks have a lot to keep track of. But got to love that active scanner. But this discussion makes me want to pull my old gunnlogi out and give her a spin. I might tonight.
The Attorney General ZionTCD 752	Posted - 2013.08.24 00:52:00 - [44] - Quote I don't stay in the redline even when solo. Better practice for the horde in PC
Washlee Pure Innocence. EoN. 260	Posted - 2013.08.24 00:52:00 - [45] - Quote Try tracking computers & a regulated railgun works like a charm
Casius Hakoke Molon Labe. League of Infamy 288	Posted - 2013.08.24 00:53:00 - [46] - Quote pegasis prime wrote: Tebu Gan wrote: pegasis prime wrote: Tebu Gan wrote: pegasis prime wrote: I put up some prerty sturdy shield fits in voids guide but that has been buried for the time being. My front line rail runs with 33% resists and about 6000 shields (rough figures) My shields are at 5400, with 33% resist, though. If I used a small aztropic extender in place of my active heatsink. Love that heatsink though. Still need to test out my passive heatsink fit. I only use the heat sync on my glass cannon. Or maddy blaster. Passives are crap for rails better for blasters. Was thinking passives with an active. Trying it on my Proto compressed first to see how many more shots I can get from it. Just wanna test the passives out. Need to look into running a heavy damage missile. hmmmm 1 10% dammage mod is good if your using proto missiles but if not then concentrait on speed and resistane. High tank low gank I keep telling folks a tank that lives will carry on doing dammage no matter what grade its turrets are. Sing it! I don't really understand some people who down grade there defenses in favor of slight damage increases. I've taken down a lot of tanks that do just that, and it doesn't make any sense to me.
Tebu Gan CrimeWave Syndicate 41	Posted - 2013.08.24 00:54:00 - [47] - Quote pegasis prime wrote: Tebu Gan wrote: pegasis prime wrote: The only time I pull maddys is whennim facing 1 or more troubling maddys. Man, always hate getting blown up by one in a close range engagement. Running missiles mostly atm, so I've been trying, but a good fit maddie eats em up. Man if I got one though, that kill would be sweeeet. If your using missiles try nit to out yoirself in anywhare where you dont habe a good 100m roind you . I verry rarely get up close to other tanks with missiles . If you can keep the maddy at about 150m then its blasters will be usless against your shields and your missiles will shread their armour. Oh I know man, and I try. I always run a speed boost but man maddies. They are faster even with my speed boost. Usually I pull in a rails to deal with them. But the few times I've tried, I have not had much success. Still workin on it. And man do blasters hurt, never ever do I go against a maddie if I run blasters. I call it suicide.
Tebu Gan CrimeWave Syndicate 41	Posted - 2013.08.24 00:54:00 - [48] - Quote Washlee wrote: Try tracking computers & a regulated railgun works like a charm Was considering giving that a try as well.
Tebu Gan CrimeWave Syndicate 41	Posted - 2013.08.24 00:57:00 - [49] - Quote pegasis prime wrote: Tebu Gan wrote: pegasis prime wrote: Tebu Gan wrote: pegasis prime wrote: I put up some prerty sturdy shield fits in voids guide but that has been buried for the time being. My front line rail runs with 33% resists and about 6000 shields (rough figures) My shields are at 5400, with 33% resist, though. If I used a small aztropic extender in place of my active heatsink. Love that heatsink though. Still need to test out my passive heatsink fit. I only use the heat sync on my glass cannon. Or maddy blaster. Passives are crap for rails better for blasters. Was thinking passives with an active. Trying it on my Proto compressed first to see how many more shots I can get from it. Just wanna test the passives out. Need to look into running a heavy damage missile. hmmmm 1 10% dammage mod is good if your using proto missiles but if not then concentrait on speed and resistane. High tank low gank I keep telling folks a tank that lives will carry on doing dammage no matter what grade its turrets are. Have a fit with proto aur missiles, got a speed booster on that setup. Hate losing it, way to useful for a bit of extra damage I would think.
Casius Hakoke Molon Labe. League of Infamy 288	Posted - 2013.08.24 00:58:00 - [50] - Quote Tebu Gan wrote: Washlee wrote: Try tracking computers & a regulated railgun works like a charm Was considering giving that a try as well. You should, an active tracking computer or whatever the mod is called, can't remember right now, is awesome. Makes a rail gun spin like a blaster.
Tebu Gan CrimeWave Syndicate 42	Posted - 2013.08.24 00:59:00 - [51] - Quote Casius Hakoke wrote: Tebu Gan wrote: Washlee wrote: Try tracking computers & a regulated railgun works like a charm Was considering giving that a try as well. You should, an active tracking computer or whatever the mod is called, can't remember right now, is awesome. Makes a rail gun spin like a blaster. Well, gonna have to go play the game now and make some new fits. Hope to see ya out there!

Pages: 1 [2] :: one page
First page \| Previous page \| Next page \| Last page