DUST Search - What you've learned from playing Dust.

NIETZCHES OVERMAN wrote:

Medical Crash wrote:

I've learned that Sper0 is a dirty liar, and doesn't keep his word. (didn't pay a damn dime in the PFC "passive ISK deal", what a greedy person, he had an entire planet at the time, ridiculous.

Also learned that 99% of tankers are toilet cleaning scrubs who ruined Ambush to the point of vehicles having to be removed.

I've learned many people here are absolute morons who don't understand how OP a 24/7 fully tacnet scan immune suit is. People, the Gallente Scout can not be scanned AT ALL- with only 3 complex dampners, that still to me is not enough of a trade off, should take all of a Proto gals low slots-AND a Cloak. I don't care about the Caldari, at least that guy can be scanned!

I've learned the aiming in this game will probably NEVER be fixed. It's so frustrating trying to aim, knowing that most of my deaths are not my fault. Go to BF3 and set DS3 sensitivity to 80 %, almost no Input lag, and the acceleration is very low. I can aim side to side very quickly. Now go back to Dust, put your X and Y settings to 100%, Y will feel slower, and the aiming will lag, terrible input lag even on a 480i CRT. Manual aiming is very annoying against fast strafing enemies in DUST because you aren't able to aim fast enough.

Let's say enemy 1 moves from point A to point B and back to point A again, this happens very quickly in a short amount of time. He's jumped, and is strafing, therefore your AA is being disabled, forcing you to aim in manual mode. Your try to get your reticule on the guy, but - and again this is with 100% sensitivity on DS3- the input lag and slow acceleration means that by the time your enemy is at point A for the second time, your reticule is barely arriving at point B. The slow acceleration and input lag, severely hinder your aiming. It's very tiring trying to make people here understand how bad the aiming mechanics in DUST514 really are. Again, to see for yourself a great comparison, go to BF3 aim there, then come back to Dust and do the same thing. The difference in aiming quality is ASTOUNDING.

I'm sure this won't be fixed, but I'll cross my fingers that the new staff member Rattati will fix this, I really hope he will.

Your AA is disabled? Forcing you to aim? Ya...... I play on max settings bc dust is so much slower than other shooters and do not have the problems you cry about. Perhaps the malfuction is in your thumbs ?


Author	Thread Statistics \| Show CCP posts - 0 post(s)
Medical Crash Paladin Survey Force Amarr Empire 357	Posted - 2014.06.18 06:14:00 - [1] - Quote I've learned that Sper0 is a dirty liar, and soesn't keep his word. Also learned that 99% of tankers are toilet cleaning scrubs who ruined Ambush to the point of vehicles having to be removed. I've learned many people here are absolute morons who don't understand how OP a 24/7 fully tacnet scan immune suit is. People, the Gallente Scout can not be scanned AT ALL- with only 3 complex dampners, that still to me is not enough of a trade off, should take all of a Proto gals low slots-AND a Cloak. I don't care about the Caldari, at least that guy can be scanned! I've learned the aiming in this game will probably NEVER be fixed. It's so frustrating trying to aim, knowing that most of my deaths are not my fault. Go to BF3 and set DS3 sensitivity to 80 %, almost no Input lag, and the acceleration is very low. I can aim side to side very quickly. Now go back to Dust, put your X and Y settings to 100%, Y will feel slower, and the aiming will lag, terrible input lag even on a 480i CRT. Manual aiming is very annoying against fast strafing enemies in DUST because you aren't able to aim fast enough. Let's say enemy 1 moves from point A to point B and back to point A again, this happens very quickly in a short amount of time. He's jumped, and is strafing, therefore your AA is being disabled, forcing you to aim in manual mode. Your try to get your reticule on the guy, but - and again this is with 100% sensitivity on DS3- the input lag and slow acceleration means that by the time your enemy is at point C, your reticule is barely arriving at point B. The slow acceleration and input lag, severely hinder your aiming. It's very tiring trying to make people here understand how bad the aiming mechanics in DUST514 really are. Again, to see for yourself a great comparison, go to BF3 aim there, then come back to Dust and do the same thing. The difference in aiming quality is ASTOUNDING. I'm sure this won;t be fixed, but I'll cross my fingers that the new staff member Rattati will fix this, I really hope he will.
Medical Crash Paladin Survey Force Amarr Empire 359	Posted - 2014.06.18 19:06:00 - [2] - Quote NIETZCHES OVERMAN wrote: Medical Crash wrote: I've learned that Sper0 is a dirty liar, and doesn't keep his word. (didn't pay a damn dime in the PFC "passive ISK deal", what a greedy person, he had an entire planet at the time, ridiculous. Also learned that 99% of tankers are toilet cleaning scrubs who ruined Ambush to the point of vehicles having to be removed. I've learned many people here are absolute morons who don't understand how OP a 24/7 fully tacnet scan immune suit is. People, the Gallente Scout can not be scanned AT ALL- with only 3 complex dampners, that still to me is not enough of a trade off, should take all of a Proto gals low slots-AND a Cloak. I don't care about the Caldari, at least that guy can be scanned! I've learned the aiming in this game will probably NEVER be fixed. It's so frustrating trying to aim, knowing that most of my deaths are not my fault. Go to BF3 and set DS3 sensitivity to 80 %, almost no Input lag, and the acceleration is very low. I can aim side to side very quickly. Now go back to Dust, put your X and Y settings to 100%, Y will feel slower, and the aiming will lag, terrible input lag even on a 480i CRT. Manual aiming is very annoying against fast strafing enemies in DUST because you aren't able to aim fast enough. Let's say enemy 1 moves from point A to point B and back to point A again, this happens very quickly in a short amount of time. He's jumped, and is strafing, therefore your AA is being disabled, forcing you to aim in manual mode. Your try to get your reticule on the guy, but - and again this is with 100% sensitivity on DS3- the input lag and slow acceleration means that by the time your enemy is at point A for the second time, your reticule is barely arriving at point B. The slow acceleration and input lag, severely hinder your aiming. It's very tiring trying to make people here understand how bad the aiming mechanics in DUST514 really are. Again, to see for yourself a great comparison, go to BF3 aim there, then come back to Dust and do the same thing. The difference in aiming quality is ASTOUNDING. I'm sure this won't be fixed, but I'll cross my fingers that the new staff member Rattati will fix this, I really hope he will. Your AA is disabled? Forcing you to aim? Ya...... I play on max settings bc dust is so much slower than other shooters and do not have the problems you cry about. Perhaps the malfuction is in your thumbs ? Oh look guys, an idiot. Too stupid to see a shoddy aiming system that's defective right in front of his face. Too dumb to argue with. Get out from that rock you are living under. Oh it's just a cowardly alt troll! Never mind mind then. Thought players still had the balls to post with their main, guess not.