| Pages: [1] :: one page |
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
Ciar'an
Company of Marcher Lords
Amarr Empire
0
   |
Posted - 2013.12.15 03:50:00 -
[1] - Quote
Hi. Been playing DUST 514 for a couple of weeks & for the most part am liking it. I would like some recommendations from vets/players who are better at FPS than I (which is I'm sure, many). I wouldn't say I'm terrible by any means, but I am certainly not as skilled as the players who can kill me from so far out that I can hardly see them.
Plus, I really am not very good at using zoom & trying to stay oriented so I don't play as a sniper.
Anyway, enough of my faults as a player; I still enjoy it, and I've definitely had more than a few times when I've played well (heh, pre 1.7 -- since I die a lot more than before. I was actually feeling as if I was getting better but now?...)
So, I've been experimenting with settings & have tried everything between 65-100. I kinda settled on 80, but even that seems off.
Another ? : is it even worthwhile to get used to anything less than 100? (I've read a lot of forums/posts & have heard that @100 your character turns/strafes better, etc...).
Thanks! |
RED FARM
GOOD OL' B0YS
30
|
Posted - 2013.12.15 03:54:00 -
[2] - Quote
x95
y69
ads
x75
y55
your mileage may vary |
Tectonic Fusion
720
|
Posted - 2013.12.15 04:10:00 -
[3] - Quote
I have my settings at 45 because I am a long range fighter, and because I use the controller, I can't aim well, and the controls aren't as good and accurate as battlefield 3. ADS needs to be 10-20 for accurate rail sniping.
Solo Player
Squad status: Locked
|
Kal Kronos
L.O.T.I.S.
Public Disorder.
149
|
Posted - 2013.12.15 04:13:00 -
[4] - Quote
90-90 hipfire 100-100 ads.
Dedicated redline sniper, tower forger, nade spammer, protostomper, formerly mass driver, and now scrambler CQC spammer.
|
Aqua-Regia
567
|
Posted - 2013.12.15 04:50:00 -
[5] - Quote
Go 10 x & 10 y Hip-Fire and 50 x & 50 y ADS.
not 0 any more
GòöGòºGòºGòºGòºGòºGòºGòùGöÉGòôBPO / BPC Collector Gòû
Gòó SoonGäó GòáGò¬Gò¬GòºGòñGòñGò¬GòñGòºGòºGòñGòªGò¬GòñGò¬GòñGòºGò¼GòíHELLOGòPGûá
GòÜGòñGòñGòñGòñGòñGòñGò¥Dust 514 GòPGò¢§GòÆGòúJJIKKGòáGòò
|
Sir Snugglz
Red Star.
EoN.
182
|
Posted - 2013.12.15 04:59:00 -
[6] - Quote
100-100 ADS |
Son-Of A-Gun
3dge of D4rkness
SoulWing Alliance
659
|
Posted - 2013.12.15 05:21:00 -
[7] - Quote
Hip fire:
x100
y20
ADS:
x70
y20
{:)}{3GÇó>
HTFU: adapt or die
|
SHANN da MAN
D3LTA FORC3
108
|
Posted - 2013.12.15 17:13:00 -
[8] - Quote
Hip fire
x: 65-75 ... Allows you to track all targets effectively without being too "twitchy"
y: 50 ... Moderate setting good for up and down axis
ADS
x: 50 ... Allows you to turn fast enough to track all non-speed tanked fittings at close range if they try to get around you, and gives satisfactory precision of aim to hit distant targets accurately
y: 50 ... Moderate setting good for up and down axis
nothing to see here ... move along
|
DozersMouse XIII
Ultramarine Corp
47
|
Posted - 2013.12.15 17:21:00 -
[9] - Quote
I keep mine at 50/50
I can run 100/100 but when I do the walls are more likely to grab a hold of me
you just have to find whats good for you
imagine the s#!t you can kill from a throne.... fu@#!n Rome.
|
Prisciila
Kameira Lodge
Amarr Empire
0
|
Posted - 2013.12.15 18:36:00 -
[10] - Quote
Aqua-Regia wrote:Go 10 x & 10 y Hip-Fire and 50 x & 50 y ADS.
not 0 any more
Did you really run at 0 / 0 ???
& thanks to everyone for the replies. Very much appreciated. |
Rynoceros
Rise Of Old Dudes
1534
|
Posted - 2013.12.15 18:58:00 -
[11] - Quote
Under the old system, I was at X-20/Y-10
Minimal dead zone
(Boycotting 1.7, don't know about new settings)
Sensitivity does not mean speed.
All speeds (turn, strafe, ADS are all determined by your Dropsuit/weapon)
Alyssa Milano.
|
Suanar Daranaus
Seykal Expeditionary Group
Minmatar Republic
87
|
Posted - 2013.12.15 19:02:00 -
[12] - Quote
Rynoceros wrote:Under the old system, I was at X-20/Y-10
Minimal dead zone
(Boycotting 1.7, don't know about new settings)
Sensitivity does not mean speed.
All speeds (turn, strafe, ADS are all determined by your Dropsuit/weapon)
Not speed? Stupid question then, WHAT does it control? I'm not messing, I don't know.
|
Aria Gomes
Death by Disassociation
Zero-Day
210
|
Posted - 2013.12.15 19:04:00 -
[13] - Quote
I have mine at 70,70 I believe. If not that then either 80,80 or 90,90. |
SHANN da MAN
D3LTA FORC3
108
|
Posted - 2013.12.15 19:37:00 -
[14] - Quote
Suanar Daranaus wrote:Rynoceros wrote:Under the old system, I was at X-20/Y-10
Minimal dead zone
(Boycotting 1.7, don't know about new settings)
Sensitivity does not mean speed.
All speeds (turn, strafe, ADS are all determined by your Dropsuit/weapon) Not speed? Stupid question then, WHAT does it control? I'm not messing, I don't know.
Sensitivity determines your turn (rotation) rate within the min/max rates determined by your Suit Frame Type
it has no effect on strafe/run speed
nothing to see here ... move along
|
Prisciila
Kameira Lodge
Amarr Empire
0
|
Posted - 2013.12.15 19:43:00 -
[15] - Quote
SHANN da MAN wrote:Suanar Daranaus wrote:Rynoceros wrote:Under the old system, I was at X-20/Y-10
Minimal dead zone
(Boycotting 1.7, don't know about new settings)
Sensitivity does not mean speed.
All speeds (turn, strafe, ADS are all determined by your Dropsuit/weapon) Not speed? Stupid question then, WHAT does it control? I'm not messing, I don't know. Sensitivity determines your turn (rotation) rate within the min/max rates determined by your Suit Frame Type Different Frames have different Min/Max turn (rotation) rates, so a sensitivity of 75 would be 75% of the max turn (rotation) rate of the Frame it has no effect on strafe/run speed
So, would it be right to presume that lower sensitivity settings would be a drawback when one has become more experienced; meaning it would probably be better to go with high sensitivity & deal with it until one can get used to it?-- rather than starting out low & trying to raise it later?
Or am I reading to much into rotation speed? |
Oswald Rehnquist
884
|
Posted - 2013.12.15 19:49:00 -
[16] - Quote
Prisciila wrote:SHANN da MAN wrote:Suanar Daranaus wrote:Rynoceros wrote:Under the old system, I was at X-20/Y-10
Minimal dead zone
(Boycotting 1.7, don't know about new settings)
Sensitivity does not mean speed.
All speeds (turn, strafe, ADS are all determined by your Dropsuit/weapon) Not speed? Stupid question then, WHAT does it control? I'm not messing, I don't know. Sensitivity determines your turn (rotation) rate within the min/max rates determined by your Suit Frame Type Different Frames have different Min/Max turn (rotation) rates, so a sensitivity of 75 would be 75% of the max turn (rotation) rate of the Frame it has no effect on strafe/run speed So, would it be right to presume that lower sensitivity settings would be a drawback when one has become more experienced; meaning it would probably be better to go with high sensitivity & deal with it until one can get used to it?-- rather than starting out low & trying to raise it later? Or am I reading to much into rotation speed?
Lower sensitivity is good against strafers, flanking, or distance
Higher sensitivity is better for head on matches and multi hostile encounters.
Below 28 dB
|
Lynn Beck
Granite Mercenary Division
Top Men.
353
|
Posted - 2013.12.15 19:55:00 -
[17] - Quote
85/80
75/70
This is ideal for me, as sniping midfield and mass drivering are all possiburu.
However forging is a slight problem, wish i could set ADS sensitivity to the forge.
Under 28db
Officially nerfproof (predicting CR nerf February '14)
The only bad AV is ones not using Plc.
|
Rynoceros
Rise Of Old Dudes
1534
|
Posted - 2013.12.15 20:03:00 -
[18] - Quote
I kept it low because I play with "heavy" thumbs.
I get more stability at lower settings, where at anything over 50 it feels "floppy".
It could also have something to do with the fact that I often use Light, Medium, and Heavy frames in every match. The lower sensitivity keeps the differences in their natural speeds somewhat manageable.
Alyssa Milano.
|
| |
|
| Pages: [1] :: one page |
| First page | Previous page | Next page | Last page |