DUST Search - Looking for an effective Incubus ADS fitting

gbghg wrote:

Logi LAV is always a good bet for a second vehicle, and you'll get standard LAV's along the way. As for your fit, I would switch the shield booster in the high to a ward shield amp, you'll find that the extra 15% resists you get off that is a life saver, and if you get your shield upgrades to lv5 that resist goes up to 23.5%. In other words your buffer is only going to take 75% damage at most and even less from swarms.

I recommend maxing your upgrade skills, the extra 2% for all that sp may seem like it's not worth it, but trust me, it really is, that extra 2% has saved my dropship more than once. The plate is a must, stick with it unless you want your ship to be faster, the reppers another must, never ever take that repper off, armour reppers are one of the biggests incubus's advantages, and it will save you not only from that dreadful thing known as armour burn but will also save you by giving you just enough HP to eat that next hit.

The hardener is a good choice, depending on your armour upgrade skill it may be more worthwhile to switch that voltaic plate for another nanofibre or polycrystalline plate, if you decide to do that and can't fit them, switch that extender to another ward amp, with a maxed shield upgrade that gives you a 33.3% resist, in other words a full third of all damage to your buffer is negated, you really notice that with forge gun shots, swarms too.

Also what are you using for your turret? Missiles or blaster? I really recommend getting both skills to maxed ASAP, it improves your offensive capability and makes you much more versatile in your fitting choice. I recommend using either the accelerated missiles, or the scattered blasters, both have their niche, and both fulfill it superbly.

Pages: [1] :: one page

Author	Thread Statistics \| Show CCP posts - 0 post(s)
Lt Hightower Krusual Covert Operators Minmatar Republic 7	Posted - 2013.08.22 15:46:00 - [1] - Quote Hello all. I have 3 MIL SP in drop ships and I am looking for the best way to outfit it. It seems like I can only do so much with the armor on this armor drop ship. 4 low slots... N-type Hardener 60mm polycrystalline Armor Plate Light Efficient Armor Repper Voltaic energized plate Then my 2 highs are Shield Extender I Light Converse Shield Booster All of these modules are level 3. ( Next step is extender and booster up to ADV) This seems to be the best set up I can come up with for the time being. I don't die too much and I get the odd kill here or there. It's fun at least. But there doesn't seem to be a whole lot of room to move up. I can max out some resistances and some turret damage but that's about it. And I'm only at 3 mil. What else is worth speccing into in vehicles or should I just save my SP?
gbghg L.O.T.I.S. 3264	Posted - 2013.08.22 18:45:00 - [2] - Quote Logi LAV is always a good bet for a second vehicle, and you'll get standard LAV's along the way. As for your fit, I would switch the shield booster in the high to a ward shield amp, you'll find that the extra 15% resists you get off that is a life saver, and if you get your shield upgrades to lv5 that resist goes up to 23.5%. In other words your buffer is only going to take 75% damage at most and even less from swarms. I recommend maxing your upgrade skills, the extra 2% for all that sp may seem like it's not worth it, but trust me, it really is, that extra 2% has saved my dropship more than once. The plate is a must, stick with it unless you want your ship to be faster, the reppers another must, never ever take that repper off, armour reppers are one of the biggests incubus's advantages, and it will save you not only from that dreadful thing known as armour burn but will also save you by giving you just enough HP to eat that next hit. The hardener is a good choice, depending on your armour upgrade skill it may be more worthwhile to switch that voltaic plate for another nanofibre or polycrystalline plate, if you decide to do that and can't fit them, switch that extender to another ward amp, with a maxed shield upgrade that gives you a 33.3% resist, in other words a full third of all damage to your buffer is negated, you really notice that with forge gun shots, swarms too. Also what are you using for your turret? Missiles or blaster? I really recommend getting both skills to maxed ASAP, it improves your offensive capability and makes you much more versatile in your fitting choice. I recommend using either the accelerated missiles, or the scattered blasters, both have their niche, and both fulfill it superbly.
Cody Sietz Bullet Cluster 756	Posted - 2013.08.22 20:29:00 - [3] - Quote I always wonder if its worth it to have two extenders or one and a shield DMG resistor. Or one extender and a shield booster.
Lt Hightower Krusual Covert Operators Minmatar Republic 7	Posted - 2013.08.22 20:38:00 - [4] - Quote gbghg wrote: Logi LAV is always a good bet for a second vehicle, and you'll get standard LAV's along the way. As for your fit, I would switch the shield booster in the high to a ward shield amp, you'll find that the extra 15% resists you get off that is a life saver, and if you get your shield upgrades to lv5 that resist goes up to 23.5%. In other words your buffer is only going to take 75% damage at most and even less from swarms. I recommend maxing your upgrade skills, the extra 2% for all that sp may seem like it's not worth it, but trust me, it really is, that extra 2% has saved my dropship more than once. The plate is a must, stick with it unless you want your ship to be faster, the reppers another must, never ever take that repper off, armour reppers are one of the biggests incubus's advantages, and it will save you not only from that dreadful thing known as armour burn but will also save you by giving you just enough HP to eat that next hit. The hardener is a good choice, depending on your armour upgrade skill it may be more worthwhile to switch that voltaic plate for another nanofibre or polycrystalline plate, if you decide to do that and can't fit them, switch that extender to another ward amp, with a maxed shield upgrade that gives you a 33.3% resist, in other words a full third of all damage to your buffer is negated, you really notice that with forge gun shots, swarms too. Also what are you using for your turret? Missiles or blaster? I really recommend getting both skills to maxed ASAP, it improves your offensive capability and makes you much more versatile in your fitting choice. I recommend using either the accelerated missiles, or the scattered blasters, both have their niche, and both fulfill it superbly. Thank you for the suggestions. I suspected that working on my shield resistance/turret skills would be my most likely next move. I generally run a proto accelerated missle turret. Seems to do the trick for both infantry and vehicles/installations. I can't seem to get close enough without dying to use the scattered though I would prefer it for infantry.
Lt Hightower Krusual Covert Operators Minmatar Republic 7	Posted - 2013.08.22 20:39:00 - [5] - Quote Cody Sietz wrote: I always wonder if its worth it to have two extenders or one and a shield DMG resistor. Or one extender and a shield booster. Yes, I would also like to know, definitively, what is the best way to tank a dropship Max Hp or Max Resistances or Extenders/boosters (shield ships) or plates/reppers (armor ships) Any advanced pilots want to help us out?!?
Cody Sietz Bullet Cluster 756	Posted - 2013.08.22 20:57:00 - [6] - Quote Lt Hightower wrote: Cody Sietz wrote: I always wonder if its worth it to have two extenders or one and a shield DMG resistor. Or one extender and a shield booster. Yes, I would also like to know, definitively, what is the best way to tank a dropship Max Hp or Max Resistances or Extenders/boosters (shield ships) or plates/reppers (armor ships) Any advanced pilots want to help us out?!? well, I've lost quite a few ships(Sadly) and so far I've all I have come up with is that each one of those is situational. Shield boosters seem to only be good for running away and repping. Not great for active combat. Resistors are good, but don't bother with basic ones. They can save you and give you a few seconds to turn on your hardeners. But the same could also be said about having 2 extenders, 2000 shields plus 2300 armour is pretty beefy. I just hate having to wait for shields to return. Its painfully slow on Gallente ships(and other Gallente vehicles as well)
gbghg L.O.T.I.S. 3277	Posted - 2013.08.22 22:15:00 - [7] - Quote Yeah, shield regen is ***** on gallente vehicles, and IMO mixing resists and HP leads to the best results, don't get me wrong max resists are awesome but sometimes it just comes down to how many numbers you have. On every single dropship fit I have I run at least 1 ward amp, the resist I get off it is worth it considering it has such small fitting requirements. As for boosters/reppers, as Cody said, they're most effective when your running, every AV weapon in the game punches through them like their tissue paper, reps only begin to outdo DPS when the second or third slot is filled with a repper and they're running simultaneously, it provides awesome burst tanking, especially when combined with a hardener, but it leaves you incredibly vulnerable when they're not activated or their in there cool downs. That said, I really recommend them if you make a fit designed for dogfighting, given dropships DPS and accuracy even a booster can rep the majority of the damage caused by a hit in between one hit and the next most of the time, you can dogfight without them but you won't be able to trade blows for as long. As for skills, as I've already said max your shield and armour upgrade skills, that extra 2% really is worth it, max your fitting skills like vehicle electronics and core upgrades, and get vehicle engineering to lv4. All of the other shield and armour skills I recommend getting to lv3, this provides you with all the mods and gives you a solid footing in both forms of tanking, from their feel free to expand on the skills as you see fit. Also, the scattered blaster works best in hit and run style combat, swoop down over an enemy concentration, fire till you overheat or 10 seconds have passed, then burn out of the area as fast as you can, do that, fly low, and use ground cover when you can and you should stay in range while making yourself harder to hit, most important thing to remember is to keep your ship moving.
richiesutie 2 Seraphim Auxiliaries 256	Posted - 2013.08.22 22:27:00 - [8] - Quote Lt Hightower wrote: Cody Sietz wrote: I always wonder if its worth it to have two extenders or one and a shield DMG resistor. Or one extender and a shield booster. Yes, I would also like to know, definitively, what is the best way to tank a dropship Max Hp or Max Resistances or Extenders/boosters (shield ships) or plates/reppers (armor ships) Any advanced pilots want to help us out?!? the incubas fit i run is 1 igl repper 1 60 mm nano-fibre plate 1 n-hardener 1 pg upgrade(i think may be a passive armour mod) 1 basic after burner 1 ward resist 1 xt accelerated missile launcher 2x st accelerated missile launcher Also I follow strict rules hardener first when shield are first hit when armour is 3/4 activate repairer if armour reaches a 1/3 activate afterburner wait 5 sec disable hardener then disable repper when full armour rinse and repeat.
Evolution-7 The Unholy Legion Of DarkStar DARKSTAR ARMY 14	Posted - 2013.08.22 23:18:00 - [9] - Quote richiesutie 2 wrote: Lt Hightower wrote: Cody Sietz wrote: I always wonder if its worth it to have two extenders or one and a shield DMG resistor. Or one extender and a shield booster. Yes, I would also like to know, definitively, what is the best way to tank a dropship Max Hp or Max Resistances or Extenders/boosters (shield ships) or plates/reppers (armor ships) Any advanced pilots want to help us out?!? the incubas fit i run is 1 igl repper 1 60 mm nano-fibre plate 1 n-hardener 1 pg upgrade(i think may be a passive armour mod) 1 basic after burner 1 ward resist 1 xt accelerated missile launcher 2x st accelerated missile launcher Also I follow strict rules hardener first when shield are first hit when armour is 3/4 activate repairer if armour reaches a 1/3 activate afterburner wait 5 sec disable hardener then disable repper when full armour rinse and repeat. Now I know how you fly I can kill you easier next time. watches the skies for evo7 mwahaha
Patrick57 GunFall Mobilization Covert Intervention 60	Posted - 2013.08.22 23:33:00 - [10] - Quote Lt Hightower wrote: Cody Sietz wrote: I always wonder if its worth it to have two extenders or one and a shield DMG resistor. Or one extender and a shield booster. Yes, I would also like to know, definitively, what is the best way to tank a dropship Max Hp or Max Resistances or Extenders/boosters (shield ships) or plates/reppers (armor ships) Any advanced pilots want to help us out?!? I am in no way an advanced pilot, but with my Python I have two standard Shield extenders, one Shield Resistance Amplifier, and a Shield Booster. Not sure how you could do this with an Incubus, but IMO a hardener or Resistance Amplifier is a great addition to boost your survivability.

richiesutie 2 Seraphim Auxiliaries 257	Posted - 2013.08.23 12:19:00 - [11] - Quote Evolution-7 wrote: richiesutie 2 wrote: Lt Hightower wrote: Cody Sietz wrote: I always wonder if its worth it to have two extenders or one and a shield DMG resistor. Or one extender and a shield booster. Yes, I would also like to know, definitively, what is the best way to tank a dropship Max Hp or Max Resistances or Extenders/boosters (shield ships) or plates/reppers (armor ships) Any advanced pilots want to help us out?!? the incubas fit i run is 1 igl repper 1 60 mm nano-fibre plate 1 n-hardener 1 pg upgrade(i think may be a passive armour mod) 1 basic after burner 1 ward resist 1 xt accelerated missile launcher 2x st accelerated missile launcher Also I follow strict rules hardener first when shield are first hit when armour is 3/4 activate repairer if armour reaches a 1/3 activate afterburner wait 5 sec disable hardener then disable repper when full armour rinse and repeat. Now I know how you fly I can kill you easier next time. watches the skies for evo7 mwahaha only way to get me out the sky is ds ramming!


Pages: [1] :: one page
First page \| Previous page \| Next page \| Last page