|
|
| Author |
Thread Statistics | Show CCP posts - 0 post(s) |
CaveCav
Eliters
D.E.F.I.A.N.C.E
11
   |
Posted - 2013.08.12 19:21:00 -
[1] - Quote
Equipping 3 hardeners, a shield booster and a shield extender would give me a constant active resist with some extra hp, is this doable? Also stacking 3 active hardeners and 2 15% passive resists and going all in on damage reduction how much damage could I take? |
CaveCav
Eliters
D.E.F.I.A.N.C.E
12
|
Posted - 2013.08.13 19:58:00 -
[2] - Quote
Should I bother having a Sica or should I always call in my Gunnlogi? In my brief life of tanker (only 1.5 mil SP) i never got my Gunnlogi popped and I lost about 4 Sicas |
CaveCav
Eliters
D.E.F.I.A.N.C.E
12
|
Posted - 2013.08.14 09:34:00 -
[3] - Quote
Ok so here I am again poking you guys, what do you think about active sinks?
In particular for a railgun fit operating between 40 and 150 meters?
I like having the capability to push with the team and I cannot always recall my tank and switch to a blaster because of blueberries  so I always feel like I'm not putting down enough shots due to heat buildup, should I use an heat sink?
Active or passive?
If I have an active heatsink and I overheat can I activate it to cooldown faster, or does it only work reducing heat buildup between shots?
And also: could someone breakdown the various turret tipes (blaster, rail, missile)?
What is the difference between standard, scattered, compressed, etc... for hybrid turrets?
What is the difference between standard, accelerated and fragmentation for missile turrets?
Is there a single Rail/Blaster/Missile that is better and I should always use?
Finally: Enforcer tanks?
I know it's a lot of questions but I really want to learn |
CaveCav
Eliters
D.E.F.I.A.N.C.E
17
|
Posted - 2013.08.30 20:22:00 -
[4] - Quote
Aaaaaaaand I'm back! It seems I'm not able to fit on the PG side an ADV blaster along with a heavy azeo extender and a heavy ward booster. On the low slots I'm using two of those 15% pg modules. Am I missing something? Are there skills that reduce PG usage by modules? Is it possible at all to fit those at the same time? |
CaveCav
Eliters
D.E.F.I.A.N.C.E
17
|
Posted - 2013.08.31 08:56:00 -
[5] - Quote
No man, props to you in writing this guide: tanks are easy to **** up and expensive so you helped me save quite a few isk and until now I never lost a Gunnlogi! I think I'm gonna give missiles a chance (proto small turrets are still a long way to go though) |
CaveCav
Eliters
D.E.F.I.A.N.C.E
18
|
Posted - 2013.09.02 20:19:00 -
[6] - Quote
Since 1.4 is dropping tomorrow and shared vision will be disabled between players, but scanners will still work fine I'm gonna be playing with them in my tank, I'll keep you guys updated |
CaveCav
Eliters
D.E.F.I.A.N.C.E
18
|
Posted - 2013.09.03 08:33:00 -
[7] - Quote
I think my problem is the logibro mentality, always my squad first |
CaveCav
Eliters
D.E.F.I.A.N.C.E
18
|
Posted - 2013.09.03 18:24:00 -
[8] - Quote
Man you have no idea, THOSE Active Scanners are just WOW. The map seems a Christmas tree when I pop them on |
CaveCav
Eliters
D.E.F.I.A.N.C.E
21
|
Posted - 2013.09.16 08:08:00 -
[9] - Quote
So I heard you like questions:
1) Since I'm lazy and I don't wanna do the math what is the max PG output for the Gunnlogi (with vehicle upgrades at level 5 and 2 local PG expansions)?
2) Something is not right with resistances or are stacking penalities different for vehicles? I have a 6% base resistance, with a Ward Amplifier I should get 6%+15% = 21% but I'm only getting 20.10% and with a second one I only get a 10% boost instead of a 13%, what is up with that?
3) I've been running two blaster fits lately and I'm thorn between a bigger buffer or a higher resistance.
The first:
1x Heavy Supplemental Shield Extender
1x Heavy Converse Shield Booster
1x Ward Azeo Shield Extender (the light one)
2x Ward Shield Ampliefier
Roughly 5700 shield with a 30% resistance.
The second:
1x Heavy Supplemental Shield Extender
1x Heavy Clarity Shield Booster
3x Ward Shield Amplifier
Rougly 4900 shield with a 36% resistance.
4) Are those things that let my Railgun fire faster actually worth something? Maybe working with an Active Sink to dish out insane amounts of damage in a few seconds before my rail overheats? Maybe only in a Glass Cannon fit?
5) Also, Glass Cannons? I need some suggestions before trying one of those, the only things I know is that I want a Compressed Rail and Damage Mods. (Yeah I'm such a noob...) |
CaveCav
Eliters
D.E.F.I.A.N.C.E
21
|
Posted - 2013.09.16 16:30:00 -
[10] - Quote
ATM I'm extremely mad because I had to downgrade the shield booster on my missile fit because I was lacking 1 CPU.
This afternoon I've been experimenting with a new blaster fit, like the 5700 shield I posted above but switching out a Ward Amplifier with a 30% active hardener, it's not bad i kinda like it.
For now I still can't fit the heavy azeo extender on my blaster fit but I will upgrade ASAP.
And those spin up time thingies are totally useless right? |
|
|
|
|
| |
|