DUST Search - Help. Rail tank

Mejt wrote:

pegasis prime wrote:

Dammage mods will reduce your tank . Try this fit

Lows- local power grid expansion
180mm steel or nano
2+ù n typey hardners
Ig polerised armour repair

Highs- acctive heat sync 50%
Kinetic energy recovery system

Turret 80gj particle accelerator

Small turrets , what ever you want/fit

This fit will allow you to take allot of dammage and give out allot of dammage 12 shotts before you over heat the hardners and repper will allow you to tank allot of ibcoming rail fire (your second highest threat) and the nitro will allow you to gtf if swarms start hitting you (your biggest threat) .

Ok i will do (Still dont like lack of dmg thing). Does this acc particle canno is better? Mean lower heat do? Bec comp uses 1/3per shoot.
Will try this fit in few hours. Will tell how good or bad this fit is. Thanks for advises.
(Last ,very last question. Maddy can fit ion cannon? Always see gunlogis can but didnt saw maddy. Maybe with full cores leveled to 5? now have best fit,you know, best plate,best rep,best hardeners,nitros,sac neutron,missiles,pg upgrade 15% and heat sync 52%)

Pages: [1] :: one page

Author	Thread Statistics \| Show CCP posts - 0 post(s)
Mejt Seykal Expeditionary Group Minmatar Republic 2	Posted - 2013.09.22 12:34:00 - [1] - Quote Eariel i was talking about blaster maddy fit. Now i dont wanna lose any more tanks... Now i wanna kill all tank and lavs as they do to me. Help me fit maddy rail. I got this one, its fresh and fast done. Tell what to add what to remove.: Maddy: -120mm plate(low pg allows me to remove pg upgrade) -hevy gl rep (and now help with these ones) -dmg 10% -passive spool or smth like this 19% -cpu upgrade Guns: -compresed particle cannon (adv one) -2 small misiles (Maybe change for blasters,lower cpu need) highs: -- nitros -- active heat sink 52% Well maybe get rid of nitros and spool for Next dmg mods? Or 1 passive hardener?
Chances Ghost D3M3NT3D M1NDZ The Umbra Combine 991	Posted - 2013.09.22 12:35:00 - [2] - Quote dont bother you cant see anything due to rendering bugs and your much better off using nitrus to get into blaster range.
True Adamance PIE Inc. Praetoria Imperialis Excubitoris 2214	Posted - 2013.09.22 12:36:00 - [3] - Quote Mejt wrote: Eariel i was talking about blaster maddy fit. Now i dont wanna lose any more tanks... Now i wanna kill all tank and lavs as they do to me. Help me fit maddy rail. I got this one, its fresh and fast done. Tell what to add what to remove.: Maddy: -120mm plate(low pg allows me to remove pg upgrade) -hevy gl rep (and now help with these ones) -dmg 10% -passive spool or smth like this 19% -cpu upgrade Guns: -compresed particle cannon (adv one) -2 small misiles (Maybe change for blasters,lower cpu need) highs: -- nitros -- active heat sink 52% Well maybe get rid of nitros and spool for Next dmg mods? Or 1 passive hardener? You don't need a rail to blow up enemy tanks. Also why are you not using the 180mm plates on this rail maddy if you don't mind me asking? For the better turret?
pegasis prime BIG BAD W0LVES 1013	Posted - 2013.09.22 12:39:00 - [4] - Quote Dont put dammage mods on a maddy rail bucke up on the maddys strenght (defense and consistent fire power) I.e. armour hardners better plate snd acctive coolant pumps for the rail turret. If your rail tanking you want to be able to take a hit and return with constent fire.
Mejt Seykal Expeditionary Group Minmatar Republic 2	Posted - 2013.09.22 12:47:00 - [5] - Quote True Adamance wrote: Mejt wrote: Eariel i was talking about blaster maddy fit. Now i dont wanna lose any more tanks... Now i wanna kill all tank and lavs as they do to me. Help me fit maddy rail. I got this one, its fresh and fast done. Tell what to add what to remove.: Maddy: -120mm plate(low pg allows me to remove pg upgrade) -hevy gl rep (and now help with these ones) -dmg 10% -passive spool or smth like this 19% -cpu upgrade Guns: -compresed particle cannon (adv one) -2 small misiles (Maybe change for blasters,lower cpu need) highs: -- nitros -- active heat sink 52% Well maybe get rid of nitros and spool for Next dmg mods? Or 1 passive hardener? You don't need a rail to blow up enemy tanks. Also why are you not using the 180mm plates on this rail maddy if you don't mind me asking? For the better turret? Using 120mm gives me 1low slot empty. Using 180mm needs pg upgrade. Next. Ik rendering is sh@ty but still can good see vehicles. Why no dmg mods? Rail at hills can be glass cannon
Sgt Buttscratch SLAPHAPPY BANDITS 794	Posted - 2013.09.22 12:52:00 - [6] - Quote I run a few different rails. If you just looking to be a hill top maddy rail sniper build a 6700 armor, 1x180mm plater, 2 harderners, heavy rep. If you have a good match you'll need to be able to walk out of an Orbi or 2. I have 3 different set up for rails, hll top, friendly tank support, and a faster infield man bear pig. As for rendering, don't listen to those tears, it's fine you just need to know how.
pegasis prime BIG BAD W0LVES 1013	Posted - 2013.09.22 12:55:00 - [7] - Quote Dammage mods will reduce your tank . Try this fit Lows- local power grid expansion 180mm steel or nano 2+ù n typey hardners Ig polerised armour repair Highs- acctive heat sync 50% Kinetic energy recovery system Turret 80gj particle accelerator Small turrets , what ever you want/fit This fit will allow you to take allot of dammage and give out allot of dammage 12 shotts before you over heat the hardners and repper will allow you to tank allot of ibcoming rail fire (your second highest threat) and the nitro will allow you to gtf if swarms start hitting you (your biggest threat) .
Mejt Seykal Expeditionary Group Minmatar Republic 2	Posted - 2013.09.22 12:59:00 - [8] - Quote pegasis prime wrote: Dammage mods will reduce your tank . Try this fit Lows- local power grid expansion 180mm steel or nano 2+ù n typey hardners Ig polerised armour repair Highs- acctive heat sync 50% Kinetic energy recovery system Turret 80gj particle accelerator Small turrets , what ever you want/fit This fit will allow you to take allot of dammage and give out allot of dammage 12 shotts before you over heat the hardners and repper will allow you to tank allot of ibcoming rail fire (your second highest threat) and the nitro will allow you to gtf if swarms start hitting you (your biggest threat) . Ok i will do (Still dont like lack of dmg thing). Does this acc particle canno is better? Mean lower heat do? Bec comp uses 1/3per shoot.
demonkiller 12 G.U.T.Z Covert Intervention 224	Posted - 2013.09.22 13:26:00 - [9] - Quote Mejt wrote: Eariel i was talking about blaster maddy fit. Now i dont wanna lose any more tanks... Now i wanna kill all tank and lavs as they do to me. Help me fit maddy rail. I got this one, its fresh and fast done. Tell what to add what to remove.: Maddy: -120mm plate(low pg allows me to remove pg upgrade) -hevy gl rep (and now help with these ones) -dmg 10% -passive spool or smth like this 19% -cpu upgrade Guns: -compresed particle cannon (adv one) -2 small misiles (Maybe change for blasters,lower cpu need) highs: -- nitros -- active heat sink 52% Well maybe get rid of nitros and spool for Next dmg mods? Or 1 passive hardener? 2 or 3 damage mods, 1 heavy repper, 1 180ml plate, i dont remember if i need a PG upgrade, certainly not a CPU upgrade, proto rail, heat sink II
pegasis prime BIG BAD W0LVES 1013	Posted - 2013.09.22 13:36:00 - [10] - Quote Mejt wrote: pegasis prime wrote: Dammage mods will reduce your tank . Try this fit Lows- local power grid expansion 180mm steel or nano 2+ù n typey hardners Ig polerised armour repair Highs- acctive heat sync 50% Kinetic energy recovery system Turret 80gj particle accelerator Small turrets , what ever you want/fit This fit will allow you to take allot of dammage and give out allot of dammage 12 shotts before you over heat the hardners and repper will allow you to tank allot of ibcoming rail fire (your second highest threat) and the nitro will allow you to gtf if swarms start hitting you (your biggest threat) . Ok i will do (Still dont like lack of dmg thing). Does this acc particle canno is better? Mean lower heat do? Bec comp uses 1/3per shoot. Will try this fit in few hours. Will tell how good or bad this fit is. Thanks for advises. (Last ,very last question. Maddy can fit ion cannon? Always see gunlogis can but didnt saw maddy. Maybe with full cores leveled to 5? now have best fit,you know, best plate,best rep,best hardeners,nitros,sac neutron,missiles,pg upgrade 15% and heat sync 52%) Sorry yea ment particke cannon . Use the accelerator with polly plates for a high tank low gank fit . The coolent pump is the differense as with the defenses on this fit you can mitigate most of the dammage from another rail and boost away from swarms . If you use the fit you can not only take dammage but put out allot aswell then relocate quickly ro put more dammage down range else whare .

pegasis prime BIG BAD W0LVES 1013	Posted - 2013.09.22 13:38:00 - [11] - Quote Also I only run dammafe mods on my gunlogi or falchion glass cannons . They also are designed to out allot of dammage down range then relocate quickly to do the same across the map wrinse and repeat.


Pages: [1] :: one page
First page \| Previous page \| Next page \| Last page